C-0352 - Channel Vision 2-Input Modulator with Bracket
The Channel Vision C-0352 2-Input Modulator with Bracket is a 2 input RF modulator that creates user selectable TV channels from standard composite video signals. In addition to creating a whole-house audio video system, the C-0352 also provides an integrated IR repeating system that runs over the same coax that delivers video to your TV set.
The Channel Vision C-0352 2-Input Modulator with Bracket is designed to snap directly into a Channel Vision structured wiring enclosure. The C-0352 provides an LED display that simplifies the set up. It also features an integrated IR engine that creates a coax based IR system.
Cabling Plus is an Authorized Stocking Distributor of the entire line of Channel Vision Products.
- Includes: (1) C-0352 2-Input Modulator with Bracket
- 2-input modulator with bracket
- Built-in IR over coax system
- LED display and pushbutton programming
- +25dBmV output
- RF Modulator
- PLL Synthesized Oscillator
- Video NTSC
- Audio L&R summed Monaural
RF Carriers
- Freq. Stability 50kHz
- Freq. Range UHF 471.25-855.25MHz
- Ultraband 469.25-859.25MHz
- Channels UHF 14-78, Ultraband 65-135
- (Excluding 95-99)
- Channel Width 6.0MHz
- Audio Offset 4.5MHz 5kHz(NTSC)
- 5.5MHz 5kHz(PAL-G)
- Sidebands Double
RF Output
- RF Carrier 25dBmV
- Video Output 1Vpp
- Audio Output 1V RMS
- Video Performance
- Differential Gain Less than 2% (0.2dB)
- Operating Temps 0-50 degrees C
- Signal/Noise Ratio >52dB
- Spurious Output Rejection
- Outside Carrier: +12MHz>70dBC
- Inside Carrier: +12MHz>66dBC
- Isolation: Greater than 70dB
Inputs
- Video: 0.4V-2.7Vpp adjustable
- Audio: 1V RMS
Connectors
- Video Inputs: RCA Female
- Audio Inputs: RCA Female
- RF Output: F type Female
- IR Outputs: 3.5mm
Transformer Input
- Input Voltage: 120VAC, 60Hz
- Power: 8 Watts
- Output Voltage: 15VDC, 450mA
Exterior
- Metal Case
- Display
- 2 digit channel display
Part#: C-0352