AL1012ULXPD8CB - Altronix 8 Output 12VDC Access Control Power Supply, 10 Amp
The Altronix AL1012ULXPD8CB is an 8 output 10 Amp access control system power supply/charger. It converts 115VAC, 60Hz input into four (8) 12VDC Class 2 Rated power limited outputs. The AL1012ULXPD8CB provides 8 outputs with 10 amps of continuous supply current. The outputs are filtered and electronically regulated, and rated @ 2.5 amp.
The Altronix AL1012ULXPD8CB4 Output 10 Amp Access Control Power Supply features a maximum charge current of 0.7 amp., AC input and DC output LED indicators, built-in charger for sealed lead acid or gel type batteries, input fuse rated @ 5 amp/250v., and an automatic switch over to stand-by battery when AC fails.
The Altronix AL1012ULXPD8CB4 includes a Lifetime Warranty when purchased from an Authorized Distributor like Cabling Plus! This is the perfect access control power supply to support professional grade access control system installations!
Includes: (1) AL1012ULXPD8CB 8 Output 12VDC 10 Amp Access Control Power Supply
- Input 115VAC, 60Hz, 1.9 amp.
- Input fuse rated @ 5 amp/250V.
- 12VDC output.
- 10 amp continuous supply current
- Eight (8) Class 2 Rated PTC protected power limited outputs.
- Outputs are rated @ 2.5 amp.
- Filtered and electronically regulated output
- Short circuit and thermal overload protection.
- Built-in charger for sealed lead acid or gel type batteries
- Automatic switch over to stand-by battery when AC fails
- Maximum charge current 0.7 amp
- AC fail supervision (form "C" contacts).
- Low battery supervision (form "C" contacts).
- Battery presence supervision (form "C" contacts)
- AC input and DC output LED indicators.
- Operating temperature: 0° C to 49° C ambient
- 61.42 BTU/Hr.
- System AC input VA requirement: 218.5VA
- Enclosure Dimensions (H x W x D approx.): 15.5” (393.7mm) x 12” (304.8mm) x 4.5” (114.3mm)
- Accommodates one (2) 12VDC/12AH batteries
- UL Listed for Access Control System Units
- NFPA 72 Compliant