Premade CCTV Cables
Are premade CCTV cables UL rated?
They should be. Premade CCTV cables should be made with the same professional quality cables you would get if you bought bulk cables and made them on your own. All of our premade CCTV cables are UL listed, CM rated, and CL2 rated. What these ratings are telling you is that our cables have been tested and verified to support general cabling requirements in a business or residential installations. They are not for use in open air plenum ceiling or riser rated environments. The CL2 rating verifies the cable can also be used for in-wall installations.
What gauge cables are your premade CCTV cables made with?
All of our premade CCTV cables are made to the specifications called for in a professional CCTV installation. The RG59 coaxial cable is a standard 20 gauge solid copper cable that includes a 95% copper braid. It is also a 75 Ohm cable that is 3.0 GHz sweep tested. The 18-2 power cable is made with 18 gauge stranded wire. Both components come attached side by side to create an easy to install Siamese cable.
Do I need to strip or cut a premade CCTV cable at any time in an installation?
You shouldn’t if you are using the right components. A premade CCTV cable already has both the DC plug and BNC connector molded to the cable. So there is really no need to cut or strip the cable. It is already set up for a plug and play installation. But, if you are installing 24VAC cameras there will not be any need for the DC plug on the power cable. The best practice is to simply attach a DC power pigtail to the power cable and then use the raw cable side to attach the camera to the two conductors from the pigtail. On the power supply side you can either use the DC power connector already on the cable, or you can again use a power pig tail to create the connection you need. The solution you use all depends on if you are using a central CCTV power supply or transformers in either 24VAC or 12VDC power types. But, regardless of the power requirements there is no need to ever have to splice or cut a premade CCTV cable.
Do premade CCTV cables have crimp or compression BNC connectors on them?
All of our premade CCTV cables feature a compression BNC connector that includes a molded strain relief boot. The molded strain relief boots increase the strength of the connections while covering the areas where the connectors are clamping to the cable. By covering the connection between the cable and the BNC connector, the molded boot also protects the terminations from dust or moisture that could hinder the performance of the cable. Our premade cables feature this molded boot design on both ends of the coaxial cable and the 18-2 power cable.
Does Cabling Plus guarantee their premade CCTV cables?
All of our premade CCTV cables are 100% tested and guaranteed. They are manufactured with professional grade connectors and cables so you get the best performance from your surveillance system.
-
PM100BK - Premade RG59 + 18/2 Power CCTV Cable, Black, 100 ft
-
PM100W - Premade RG59 + 18/2 CCTV Siamese Cable, White, 100 ft
-
PM150BK - Premade RG59 + 18/2 Power CCTV Cable, Black, 150 ft
-
PM150W - Premade RG59 + 18/2 CCTV Siamese Cable, White, 150 ft
-
PM200BK - Premade RG59 + 18/2 Power CCTV Siamese Cable, Black, 200 ft
-
PM200W - Premade RG59 + 18/2 CCTV Siamese Cable, White, 200 ft
-
PM25BK - Premade RG59 + 18/2 Power CCTV Siamese Cable, Black, 25 ft
-
PM25W - Premade RG59 + 18/2 CCTV Siamese Cable, White, 25 ft
-
PM60BK - Premade RG59 + 18/2 Power CCTV Siamese Cable, Black, 60 ft
-
PM60W - Premade RG59 + 18/2 CCTV Siamese Cable, White, 60 ft