P-0328 - Channel Vision Affinity 3×8 Digital Cable Combiner
The Channel Vision P-0328 Affinity 3×8 Digital Cable Combiner allows you to integrate modulated signals into a digital cable system without using an RF filter. This allows several modulated channels to be integrated with a full digital cable feed without requiring any digital programming to be filtered out.
Basic Application
Connect the P-0328 locate it at the main distribution point in the house. The output of the P-0328 will send both CATV and the modulator’s output to the TV location over a single coax cable. Switching between the CATV and modulator signals is simple: just point the remote at an IR receiver connected to the coax-based IR system and the IR signal will travel back to the P-0328 and change it to the desired input.
The Channel Vision P-0328 Affinity 3×8 Digital Cable Combiner includes a simple remote control that allows you to select between cable and modulated channels. The P-0328 combines TV with modulated signals and amplifies up to 8 Outputs. It eliminates digital cable interference and related field call backs.
Cabling Plus is an Authorized Stocking Distributor of the entire line of Channel Vision Products.
- Includes: (1) P-0328 Affinity 3×8 Digital Cable Combiner
- The Only Answer to Modulating on Digital Cable…Guaranteed!
- Eliminates cable interference without the use of filters
- Remote Control Included – offers simple push button selection between cable and modulated channels
- Eliminates digital cable interference and related field call backs
- Easy Source Switch between Cable and Modulator
- Combines TV with Modulated Signals and Amplifies up to 8 Outputs
- Eliminates Cable Interference Without Filters
- RF Amplifier Unity Gain On All Outputs
Affinity Specifications
- Forward Gain CAT5 in – out 54-1000MHz Unity Gain MOD in – out 54-1000MHz –12dB
- Reverse Channel Out to CATV in 5-42MHz -12dB
- Power Supply: 15VDC, 800mA regulated
- Isolation CAT5 in to TV output 54-1000MHz >50dB (60dB typical)
- MOD in to TV output 54-1000MHz >50dB (60dB typical)
- Dimensions: 11” (w) x 6.5” (h) x 2.25” (d)
- IR Over Coax Compatible with the Channel Vision IR-4100 and IR-4101 only
- Compliances: FCC part 15; RoHS, (UL listed power supply)
IR-Receiver Specifications
- Voltage Requirements: 8-12 VDC
- IR Frequency Range Supported: 30kHz-60kHz
- IR Pickup Range: 40 ft. @ 38kHz, 25 ft. @ 56kHz
- IR-Receiver Head Dimensions: 0.65” x 0.35” x 0.25”
- Color: Black
- Compliances: RoHS
Part#: P-0328